Studio Comms: Difference between revisions

From YSTV History Wiki
Jump to navigation Jump to search
(New page: Conceived for Breaker 88, and still in regular use in YSTV's studios in 2007)
 
(details on the comms system and some pics)
Line 1: Line 1:
Conceived for Breaker 88, and still in regular use in YSTV's studios in 2007
Some people say that Studio Comms are the last thing to be set up and the first thing to go wrong when a YSTV programme is made. Conceived for Breaker 88, and still in regular use in YSTV's studios in 2007.
 
[[Image:19940226_8-siward-street_ystv-comms-system.jpg|thumb|comms system laid bare]]
[[Image:19940226_8-siward-street_john-stubley-ystv-comms-system.jpg|thumb|John Stubley trying to fix one connection before another one breaks]]
 
Prior to [[Election Night 1994]] it was recognised that the Studio Comms system needed a look at to see if any of the idiosyncracies could be ironed out from the system. [[John Stubley]] volunteered for this role and was assisted by [[Owain Davies]]. Normally the system would have been in full time use, however since YSTV at the time was a station without studio, it enabled the system to have a good going over.
 
The system came out of storage somewhere on campus and went round to Owain's place of residence at the time, 8 Siward Street. For two weekends, John and Owain worked on the system in the front room. Their impression of the system was that some thought must have gone into the design of the system, however the realisation gave the impression that it had all been thrown together at a very last minute. The design of the system seemed to consist of
 
* three floor manager sets
* four separate output channels for speaking to cameras
* a system of red and green lights for the camera people to signal back to the director (rarely used effectively - often used by camera people to indicate their frustrations with the director)
* two seperate channels to speak to presenters
* three control boxes allowing upto three people to independently control and talk to parts or all of the system.
* a control room ring circuit to allow the presenters to talk to each other
 
The system was primarily constructed on veroboard, which were either mounted on pillars on sides of the system or, as in the case of three boards containing the analogue switches, held by gaffa tape in the centre of the box.
 
Owain and John did transcribe some of the circuitry on to paper, which led to the explanation for why the control room ring circuit never worked. At some point in the earlier life of the system, an electrolytic smoothing capacitor had been placed erroneoulsy between ground and the audio channel for the control room ring circuit on one of the analogue switch boards. This was removed from audio channel and placed on the relevant supply rail as it was on the other two boards. Their remaining time was spent sorting out an accummulation of minor faults in all the other ancillary equipment that went with the system.
 
Some time in {{unsure|1995 or 1996}}, Owain adapted the system to give a line level output (loose description) from one of the directors boxes to feed into the SVHS machine on one of the audio channels. Channel separation was pretty good on the stereo track of the SVHS. This was done on-the-quiet for Election Night, where the SVHS machine had the honour of recording the proceedings. After the programme, there was a complaint about some comments being made over the comms systems about one of the guests. The tapes were reviewed, and as it happened the directors boxed that was tapped turned out to be the producers as opposed to the true direcoter, so the issue could not resolved categorically (I believe the line at the time, was that there was nothing on the tape). Never the less, it did provide an interesting retrospective into the mechanics of the program.

Revision as of 07:31, 11 May 2007

Some people say that Studio Comms are the last thing to be set up and the first thing to go wrong when a YSTV programme is made. Conceived for Breaker 88, and still in regular use in YSTV's studios in 2007.

comms system laid bare
John Stubley trying to fix one connection before another one breaks

Prior to Election Night 1994 it was recognised that the Studio Comms system needed a look at to see if any of the idiosyncracies could be ironed out from the system. John Stubley volunteered for this role and was assisted by Owain Davies. Normally the system would have been in full time use, however since YSTV at the time was a station without studio, it enabled the system to have a good going over.

The system came out of storage somewhere on campus and went round to Owain's place of residence at the time, 8 Siward Street. For two weekends, John and Owain worked on the system in the front room. Their impression of the system was that some thought must have gone into the design of the system, however the realisation gave the impression that it had all been thrown together at a very last minute. The design of the system seemed to consist of

  • three floor manager sets
  • four separate output channels for speaking to cameras
  • a system of red and green lights for the camera people to signal back to the director (rarely used effectively - often used by camera people to indicate their frustrations with the director)
  • two seperate channels to speak to presenters
  • three control boxes allowing upto three people to independently control and talk to parts or all of the system.
  • a control room ring circuit to allow the presenters to talk to each other

The system was primarily constructed on veroboard, which were either mounted on pillars on sides of the system or, as in the case of three boards containing the analogue switches, held by gaffa tape in the centre of the box.

Owain and John did transcribe some of the circuitry on to paper, which led to the explanation for why the control room ring circuit never worked. At some point in the earlier life of the system, an electrolytic smoothing capacitor had been placed erroneoulsy between ground and the audio channel for the control room ring circuit on one of the analogue switch boards. This was removed from audio channel and placed on the relevant supply rail as it was on the other two boards. Their remaining time was spent sorting out an accummulation of minor faults in all the other ancillary equipment that went with the system.

Some time in 1995 or 1996Unverified or incomplete information, Owain adapted the system to give a line level output (loose description) from one of the directors boxes to feed into the SVHS machine on one of the audio channels. Channel separation was pretty good on the stereo track of the SVHS. This was done on-the-quiet for Election Night, where the SVHS machine had the honour of recording the proceedings. After the programme, there was a complaint about some comments being made over the comms systems about one of the guests. The tapes were reviewed, and as it happened the directors boxed that was tapped turned out to be the producers as opposed to the true direcoter, so the issue could not resolved categorically (I believe the line at the time, was that there was nothing on the tape). Never the less, it did provide an interesting retrospective into the mechanics of the program.