Three Composite along Cat-5: Difference between revisions
Jump to navigation
Jump to search
m
→Practical Setup
(modifications made) |
|||
| Line 5: | Line 5: | ||
This requires a length of CAT5 computer network cable long enough to join the points you want to send video between, the pair of VGA over CAT5 adaptors, and the pair of BNC to VGA break-out boxes. The cat5 adapters are both different, IE there is a 'transmitter' and a 'receiver'. Both of these are powered from a mains-to-DC adapter. | This requires a length of CAT5 computer network cable long enough to join the points you want to send video between, the pair of VGA over CAT5 adaptors, and the pair of BNC to VGA break-out boxes. The cat5 adapters are both different, IE there is a 'transmitter' and a 'receiver'. Both of these are powered from a mains-to-DC adapter. | ||
"Both the BNC to VGA adaptors and the VGA over CAT5 are different at the two ends, so you need the right bits at each end of the cable." | From the old YSTV website: "Both the BNC to VGA adaptors and the VGA over CAT5 are different at the two ends, so you need the right bits at each end of the cable." | ||
[[User:Malcolm.chambers|Malcolm.chambers]] 20:57, 1 January 2010 (UTC) The powered cat5 adapters are certainly different and the right one must be at each end. HOWEVER, I don't see why the bodged BNC to VGA adapters should be different, surely the same pin is used at both ends of a VGA cable for each colour. Having made the claim that they're identical, problems (IE none of the three video signals reaching their destination) were experienced at Woodstock 2009, and if the BNC to VGA bodges are indeed different then this could be the source of the problem. | |||
=====Technical Operation===== | =====Technical Operation===== | ||