Net Mux: Difference between revisions
Jump to navigation
Jump to search
m
Basic operation, card layot, and inputs/outputs straight from old site, and neatened
mNo edit summary |
m (Basic operation, card layot, and inputs/outputs straight from old site, and neatened) |
||
| Line 3: | Line 3: | ||
(Straight from the old website) | (Straight from the old website) | ||
* Make sure that the controls are enabled by pushing the Panel Enable button until it illuminates. | |||
* Press the Button below the display for the output you want to change (not marked, but 4 of them), which will blank the display and flash the button. | |||
* Press the desired input button (numbered 1 to 16). Number appears in the display, and the Take button at right hand side flashes. | |||
* Press Take to make the change. | |||
Multiple changes can be loaded (indicated by the output button being lit) before all are executed at once by pressing Take. | Multiple changes can be loaded (indicated by the output button being lit) before all are executed at once by pressing Take. | ||
| Line 97: | Line 97: | ||
The key commands are: | The key commands are: | ||
* READ to find out the current inputs selected | |||
* LEVEL N to control which of the 4 outputs are selected for alteration | |||
* BUFFER A to assign a buffer to load commands into | |||
* BUFFER CLEAR to empty it | |||
* XPT X,01 to add a command to the buffer for input X | |||
* EXECUTE A to execute queued commands | |||
All commands can be abbreviated to the single initial letter. | All commands can be abbreviated to the single initial letter. | ||