P169 Replacement: Difference between revisions

From YSTV History Wiki
Jump to navigation Jump to search
(New page: This is a project initiated by Michael Cullen aiming to replace the old slowly dying P169s with something a little more modern. It's still in the planning stages, though the softwa...)
 
m (sp. and _=space)
Line 1: Line 1:
This is a project initiated by [[Michael Cullen]] aiming to replace the old slowly dying [[P169]]s with something a little more modern. It's still in the planning stages, though the software is about half written, and the hardware is mostly designed (with the Maxim chips aquired).  
This is a project initiated by [[Michael Cullen]] aiming to replace the old slowly dying [[P169]]s with something a little more modern. It's still in the planning stages, though the software is about half written, and the hardware is mostly designed (with the Maxim chips acquired).  


The plan is to construct an 8x8 version of the [[Station_Video_Mux]] using the newer equivalent of the Maxim chips aquired using the same method. This is complicated somewhat as the op-amps needed by these maxim chips are only available as surface mount devices.  
The plan is to construct an 8x8 version of the [[Station Video Mux]] using the newer equivalent of the Maxim chips acquired using the same method. This is complicated somewhat as the op-amps needed by these maxim chips are only available as surface mount devices.  


The circuit will be controlled by an Atmel AVR because [[Michael Cullen]] likes these.
The circuit will be controlled by an Atmel AVR because [[Michael Cullen]] likes these.

Revision as of 15:32, 24 September 2009

This is a project initiated by Michael Cullen aiming to replace the old slowly dying P169s with something a little more modern. It's still in the planning stages, though the software is about half written, and the hardware is mostly designed (with the Maxim chips acquired).

The plan is to construct an 8x8 version of the Station Video Mux using the newer equivalent of the Maxim chips acquired using the same method. This is complicated somewhat as the op-amps needed by these maxim chips are only available as surface mount devices.

The circuit will be controlled by an Atmel AVR because Michael Cullen likes these.