VT 8x4 Video Switcher: Difference between revisions

From YSTV History Wiki
Jump to navigation Jump to search
mNo edit summary
No edit summary
 
(6 intermediate revisions by 3 users not shown)
Line 1: Line 1:
{{Outofdate}}
{{HDNO}}
{{Weee}}
This is often referred to as VT 'P169' since in September 2009 it replaced the old VT P169 which was an actual [[DaVE P169|P169]].
This is often referred to as VT 'P169' since in September 2009 it replaced the old VT P169 which was an actual [[DaVE P169|P169]].
This is actually a slightly lower-quality matrix switcher.
This is actually a slightly lower-quality matrix switcher.
Line 13: Line 17:
This allowed VT 8x4 to switch inputs.
This allowed VT 8x4 to switch inputs.
As clock is always on, and in some cases we need to use the unit outside of a show, the matrix is now fed as above, permanently. [[Magic DaVE]] B&B would also work, but this way, it doesn't need to be turned on.
As clock is always on, and in some cases we need to use the unit outside of a show, the matrix is now fed as above, permanently. [[Magic DaVE]] B&B would also work, but this way, it doesn't need to be turned on.
[[Category:Vision Path]]
[[Category:Old Equipment]]

Latest revision as of 12:52, 6 August 2023

cancel.png Information on this page may be out of date or apply to old equipment. Use with caution.

Template:HDNO

bomb.png WEEE!
This piece of equipment has been disposed of.


This is often referred to as VT 'P169' since in September 2009 it replaced the old VT P169 which was an actual P169. This is actually a slightly lower-quality matrix switcher.

Connections:

Inputs:

  • 8x composite
  • 1x Ref must be present

Outputs:

  • 4x composite

Reference signal

Michael Cullen did an experiment in 2009, where a DA'ed 'YSTV Clock' video signal was put into the reference input: This allowed VT 8x4 to switch inputs. As clock is always on, and in some cases we need to use the unit outside of a show, the matrix is now fed as above, permanently. Magic DaVE B&B would also work, but this way, it doesn't need to be turned on.