Canon XM2

From YSTV History Wiki
Revision as of 18:16, 30 March 2013 by Greg.ebdon (talk | contribs) (created article)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
File:Canon XM2.JPG
A Canon DM-XM2.

The Canon DM-XM2s are two SD camcorders bought by YSTV in late 2006. They record to MiniDV tape in 4:3 or 16:9 SD, shoot still photos to tape or SD card up to 1488x1128, and have phono and S-Video composite video outputs for live use. We have 3 batteries - 2 Jessops BP-930-compatibles (~2hr 15m recording) and one BP-915 (~55m). They're perfect for quick-and-dirty VT shooting, monitoring a scene or single-person electronic news gathering. We often use them for big OBs such as Roses, Golden Bodges or the Central Hall monitors rig.

Features

  • 1/4” 3CCD PAL sensor
  • 20x optical zoom on a variable-speed rocker with optical image stabilisation (Canon Video Lens 4.2-84mm f/1.6-2.9 L IS; minimum focus 1cm at 4.2mm, 1m at 84mm).
  • Manual focus, aperture, shutter, gain and audio levels (independent L/R)
  • Auto, daylight, tungsten and custom white balance
  • PCM 48kHz 16-bit stereo audio through built-in stereo electret condenser microphone or line input
  • Configurable zebra pattern
  • ND filter for bright environments
  • SMPTE bars output and recording (Digital Effects button)
  • Interval recording
  • Low-angle shooting controls on top handle
  • Mains power via charger and battery plate

Notes

  • One has a Tiffen 58mm Digital Ultra Clear WW filter, the other a Jessops 58mm Skylight 1A. The Skylight has a slight colour tint and UV reduction properties, the Tiffen is solely for protection (and according to the internet is uncoated and pretty bad quality - if you get flares or reflections in bright light, remove it).
  • Behind the LCD screen is a replaceable CR2025 button battery used to remember the camera settings when other power sources are disconnected. These run out after a while: the easiest way to diagnose this is if the camera forgets the date/time between uses. All settings will have to be reset every time the camera is turned on/off until the battery is replaced, including the Demo Mode setting (in the System menu) which will start to demo the camera's features after 5 minutes if left on.
  • To use the electronic viewfinder instead of the LCD screen, the screen must be closed or flipped to face forward of the camera.

External Links