Polar vision mixer: Difference between revisions

From YSTV History Wiki
Jump to navigation Jump to search
(another image of the polar in use)
(add to category)
Line 5: Line 5:
Until {{unsure|1997}} it always had a worrying rattle, this was resolved by drilling the heads off the security screws and emptying out a loose nut, and replacing the screws with slot heads.
Until {{unsure|1997}} it always had a worrying rattle, this was resolved by drilling the heads off the security screws and emptying out a loose nut, and replacing the screws with slot heads.
[[Image:VisionMixer.jpg|right|thumb|200px|Vision mixer in user]]
[[Image:VisionMixer.jpg|right|thumb|200px|Vision mixer in user]]
[[Category: Equipment]]

Revision as of 13:26, 26 May 2007

Polar vision mixer

4 inputs and a black source. Preview and programme outputs. Much luma keying, no chroma keying.

Until 1997Unverified or incomplete information it always had a worrying rattle, this was resolved by drilling the heads off the security screws and emptying out a loose nut, and replacing the screws with slot heads.

Vision mixer in user