S-Video to Composite: Difference between revisions
First description
m (Initial draft) |
(First description) |
||
| Line 5: | Line 5: | ||
Pin 4 and 3 are connected straight to the signal pin of composite. Pin 2 and 1 are connected straight to the ground pin of composite. | Pin 4 and 3 are connected straight to the signal pin of composite. Pin 2 and 1 are connected straight to the ground pin of composite. | ||
In the better, but more complicated, version a capacitor is used. The value of this capacitor can be anywhere between | In the better, but more complicated, version a capacitor is used. The value of this capacitor can be anywhere between 400pF and 10nF according to the web link : [http://www.epanorama.net/circuits/svideo2cvideo.html http://www.epanorama.net/circuits/svideo2cvideo.html]. One bought from Farnell used 420pF, Ystv has lots with 470pF capacitors. | ||
In the complicated version pin 4 (the crominance) is NOT connected straight to the composite signal pin. Pin 4 is connected to the capacitor, the other terminal of the capacitor is connected to the composite pin. | |||
Pin 3 (the luminance) is connected straight to the composite signal pin. If a physically small capacitor is used then it can just about be contained within the plug case, this is of course a more durable method than having it exposed. | |||
As with the simple bodge, the complicated bodge has pins 1 and 2 connected straight to the compostie ground. | |||
Notes are that this will supposedly take an S-Video signal and convert it to a PAL or NTSC compatible composite signal. 75 ohm shielded cable should be used, failing that it should be shielded audio cable. | |||