Goodricke-Physics-Hub - Revision history

Peter.eskdale at 12:58, 28 September 2016

2016-09-28T12:58:14Z

← Older revision		Revision as of 12:58, 28 September 2016
Line 1:		Line 1:
	This leg of the [[Current Broadcast Network]] ~~carries~~ the video and audio feeds from the [[G/046\|studio]] through to the [[Broadcast Hub\|central distribution hub]] where it is distributed out to the various destinations on campus~~. It is now the oldest part of the network, having been in it's current form since the station moved to [[G/046]] in 1994~~.		This leg of the [[Current Broadcast Network]] carried the video and audio feeds from the [[G/046\|studio]] through to the [[Broadcast Hub\|central distribution hub]] where it was distributed out to the various destinations on campus.

	=== Structure ===		=== Structure ===
Line 48:		Line 48:
	\|+ Colour Code in P/X/002 to P/S/016 to Hub cables		\|+ Colour Code in P/X/002 to P/S/016 to Hub cables
	\|}		\|}

			=== Demise ===
			In 2011, the long-awaited construction of a new SU building on the site of the old dining room and bar resulted in the removal of a section of covered walkway connecting Physics and the now-James College building. The cabling running through this section was cut, severing the connection from G/046 to the rest of the network, and was eventually left coiled on the roof of the new building upon it's completion in June 2012. No attempt was made to reconnect the lines as the network was by then rarely used, with IP distribution becoming the norm. Cabling remains on the roof to this day.

			In September 2016, the line coming into G/046 were cut in an effort to tidy up the control room cabling. The exterior cabling is still present.

Mikechislett: Undo revision 5553 by Mikechislett (Talk)

2010-01-14T20:20:39Z

Undo revision 5553 by Mikechislett (Talk)

← Older revision		Revision as of 20:20, 14 January 2010
Line 16:		Line 16:
	In P/S/016 the audio cables are joined straight on to the 6-pair Rediffusion audio contribution cable which runs to the [[Broadcast Hub\|Hub]] (originally to LTC). The unbalanced video is fed into a line driver in order to drive one half of the shielded twisted pair Rediffusion video contribution cable to the Hub.		In P/S/016 the audio cables are joined straight on to the 6-pair Rediffusion audio contribution cable which runs to the [[Broadcast Hub\|Hub]] (originally to LTC). The unbalanced video is fed into a line driver in order to drive one half of the shielded twisted pair Rediffusion video contribution cable to the Hub.

	These contribution cables go back up into the ceiling void, and then back along the corridor to the concourse, and into the pipe under it, now taking the right turn by the porter's lodge to head through the building and out into the covered walkway towards Central Hall.		These contribution cables go back up into the ceiling void, and then back along the corridor to the concourse, and into the pipe under it, now taking the right turn by the porter's lodge to head through the building and out into the covered walkway towards Central Hall. This duct goes across the bridge (exactly how is unknown), then into the underground duct past the front of Central Hall, before coming back up to reach the Hub. This run consists of unbroken Rediffusion cabling.

	The two Black Redddifusion cables emerge from physics (it looks like from the roof!), and are draped onto the covered walkway, where they go into a hole (lake side) inside the walkway, over the bridge. Then out of a hole on the other end of the bridge(on the side facing the main bit of the lake), this is draped onto central hall stairs in a nice pile (Thankyou contractors for laying the cable across the bridge~~!).~~

	~~What would have been the continues two reddiffusion cables start off in a man hole~~ (~~whose cover~~ is ~~2 foot from the Vented doors of central hall~~) ~~and travel~~ the underground duct past the front of Central Hall, before coming back up to reach the Hub. ~~The~~ run consists of Rediffusion cabling~~. It just needs connecting from the stairs to the man hole~~.

	=== Core Colours ===		=== Core Colours ===

Mikechislett: Undo revision 5554 by Mikechislett (Talk)

2010-01-14T20:20:20Z

Undo revision 5554 by Mikechislett (Talk)

← Older revision		Revision as of 20:20, 14 January 2010
Line 20:		Line 20:
	The two Black Redddifusion cables emerge from physics (it looks like from the roof!), and are draped onto the covered walkway, where they go into a hole (lake side) inside the walkway, over the bridge. Then out of a hole on the other end of the bridge(on the side facing the main bit of the lake), this is draped onto central hall stairs in a nice pile (Thankyou contractors for laying the cable across the bridge!).		The two Black Redddifusion cables emerge from physics (it looks like from the roof!), and are draped onto the covered walkway, where they go into a hole (lake side) inside the walkway, over the bridge. Then out of a hole on the other end of the bridge(on the side facing the main bit of the lake), this is draped onto central hall stairs in a nice pile (Thankyou contractors for laying the cable across the bridge!).

	What would have been the ~~continued~~ two reddiffusion cables ~~then starts~~ off in a man hole (whose cover is 2 foot from the Vented doors of central hall) and travel the underground duct past the front of Central Hall, before coming back up to reach the Hub. The run consists of Rediffusion cabling. It just needs connecting from the stairs to the man hole.		What would have been the continues two reddiffusion cables start off in a man hole (whose cover is 2 foot from the Vented doors of central hall) and travel the underground duct past the front of Central Hall, before coming back up to reach the Hub. The run consists of Rediffusion cabling. It just needs connecting from the stairs to the man hole.

	=== Core Colours ===		=== Core Colours ===

Mikechislett at 23:28, 11 January 2010

2010-01-11T23:28:17Z

← Older revision		Revision as of 23:28, 11 January 2010
Line 20:		Line 20:
	The two Black Redddifusion cables emerge from physics (it looks like from the roof!), and are draped onto the covered walkway, where they go into a hole (lake side) inside the walkway, over the bridge. Then out of a hole on the other end of the bridge(on the side facing the main bit of the lake), this is draped onto central hall stairs in a nice pile (Thankyou contractors for laying the cable across the bridge!).		The two Black Redddifusion cables emerge from physics (it looks like from the roof!), and are draped onto the covered walkway, where they go into a hole (lake side) inside the walkway, over the bridge. Then out of a hole on the other end of the bridge(on the side facing the main bit of the lake), this is draped onto central hall stairs in a nice pile (Thankyou contractors for laying the cable across the bridge!).

	What would have been the ~~continues~~ two reddiffusion cables ~~start~~ off in a man hole (whose cover is 2 foot from the Vented doors of central hall) and travel the underground duct past the front of Central Hall, before coming back up to reach the Hub. The run consists of Rediffusion cabling. It just needs connecting from the stairs to the man hole.		What would have been the continued two reddiffusion cables then starts off in a man hole (whose cover is 2 foot from the Vented doors of central hall) and travel the underground duct past the front of Central Hall, before coming back up to reach the Hub. The run consists of Rediffusion cabling. It just needs connecting from the stairs to the man hole.

	=== Core Colours ===		=== Core Colours ===

Mikechislett: Chislett & Cullen Found the RD cables on the bridge - 11/01/2010

2010-01-11T23:27:42Z

Chislett & Cullen Found the RD cables on the bridge - 11/01/2010

← Older revision		Revision as of 23:27, 11 January 2010
Line 16:		Line 16:
	In P/S/016 the audio cables are joined straight on to the 6-pair Rediffusion audio contribution cable which runs to the [[Broadcast Hub\|Hub]] (originally to LTC). The unbalanced video is fed into a line driver in order to drive one half of the shielded twisted pair Rediffusion video contribution cable to the Hub.		In P/S/016 the audio cables are joined straight on to the 6-pair Rediffusion audio contribution cable which runs to the [[Broadcast Hub\|Hub]] (originally to LTC). The unbalanced video is fed into a line driver in order to drive one half of the shielded twisted pair Rediffusion video contribution cable to the Hub.

	These contribution cables go back up into the ceiling void, and then back along the corridor to the concourse, and into the pipe under it, now taking the right turn by the porter's lodge to head through the building and out into the covered walkway towards Central Hall. ~~This duct goes~~ across the bridge (~~exactly how~~ is ~~unknown~~)~~, then into~~ the underground duct past the front of Central Hall, before coming back up to reach the Hub. ~~This~~ run consists of ~~unbroken~~ Rediffusion cabling.		These contribution cables go back up into the ceiling void, and then back along the corridor to the concourse, and into the pipe under it, now taking the right turn by the porter's lodge to head through the building and out into the covered walkway towards Central Hall.

			The two Black Redddifusion cables emerge from physics (it looks like from the roof!), and are draped onto the covered walkway, where they go into a hole (lake side) inside the walkway, over the bridge. Then out of a hole on the other end of the bridge(on the side facing the main bit of the lake), this is draped onto central hall stairs in a nice pile (Thankyou contractors for laying the cable across the bridge!).

			What would have been the continues two reddiffusion cables start off in a man hole (whose cover is 2 foot from the Vented doors of central hall) and travel the underground duct past the front of Central Hall, before coming back up to reach the Hub. The run consists of Rediffusion cabling. It just needs connecting from the stairs to the man hole.

	=== Core Colours ===		=== Core Colours ===

Dummy User: /* Core Colours */

2007-08-17T15:17:22Z

Core Colours

← Older revision		Revision as of 15:17, 17 August 2007
Line 19:		Line 19:

	=== Core Colours ===		=== Core Colours ===
	This reflects the wiring in place as of 2006. As all the joints are soldered or terminal blocked, it's unlikely to change, although the patching of the connectors may well do so.		This reflects the {{unsure \| audio?}} wiring in place as of 2006. As all the joints are soldered or terminal blocked, it's unlikely to change, although the patching of the connectors may well do so.

	{\| border="1"		{\| border="1"

Dummy User: add some photographs, note on cable hole

2007-07-21T19:38:20Z

add some photographs, note on cable hole

← Older revision		Revision as of 19:38, 21 July 2007
Line 3:		Line 3:
	=== Structure ===		=== Structure ===
	The cable route consists of a series of extensions added on at each major upheaval in YSTV's history to allow us to keep broadcasting via the existing infrastructure. It is therefore less than planned.		The cable route consists of a series of extensions added on at each major upheaval in YSTV's history to allow us to keep broadcasting via the existing infrastructure. It is therefore less than planned.
			[[Image:Goodricke-Physics Cables.jpg\|thumb\|right\| Out of the window]]
	Behind the monitor rack in the [[G/046\|control room]] is a piece of tag strip screwed to the cable duct, which has three XLR connectors coming off it. These are marked up as Network Audio, Derwent Send and Derwent Return. The last two are basically contribution circuits and re-patched as needed, whilst Network Audio should be fed with the balanced network audio signal. Video is carried on a standard BNC connector plugged in to patch box 6.		Behind the monitor rack in the [[G/046\|control room]] is a piece of tag strip screwed to the cable duct, which has three XLR connectors coming off it. These are marked up as Network Audio, Derwent Send and Derwent Return. The last two are basically contribution circuits and re-patched as needed, whilst Network Audio should be fed with the balanced network audio signal. Video is carried on a standard BNC connector plugged in to patch box 6.
			[[Image:Goodricke-Physics Cables2.jpg\|thumb\|left\| Over the top]]
	From the tag strip a 3-pair sheilded cable of the type used for the 1998 network and the 150m unbalanced video cable (originally made for [[Breaker 88]]) go through the window frame by the monitor rack, along the top of the G/045 windows and up over the room of the college nucleus. From here it wends it's way down along the covered walkway past the (old) Dining Hall and the bar to the "bus stop", then turns left past the cash machine towards the Physics and Electronics building. Just before the doors into this it goes through ~~a hole~~ in the wall of the building to reach the attic room above [[P/X/002]].		From the tag strip a 3-pair sheilded cable of the type used for the 1998 network and the 150m unbalanced video cable (originally made for [[Breaker 88]]) go through the window frame by the monitor rack, along the top of the G/045 windows and up over the room of the college nucleus. From here it wends it's way down along the covered walkway past the (old) Dining Hall and the bar to the "bus stop", then turns left past the cash machine towards the Physics and Electronics building. Just before the doors into this it goes through holes in the wall of the building to reach the attic room above [[P/X/002]]. There are in fact two separate holes. One above the walkway takes the audio cable and the coax return feed cables, and the other about 2 feet from the floor takes the network video cable, which has wondered off the side of the walkway with a cable tie round the walkway leg to keep it there. This cable then goes up the wall of P/X/002 and then across the ceiling to reach the attic.
			[[Image:PX002 hole in wall.jpg\|thumb\|right\|The hole in the wall]]
	Above P/X/002 there is a wall box with a white plate on it carrying two BNC connectors and four 1/4" jack sockets (someone in York - please take a photo and add it here). These are the ends of the old Rediffusion local contribution cables to [[P/S/016]]. Originally these would have taken individual camera feeds back to the studio and AV rack in P/S/016, but now they act as a pair of audio and video tie lines. The unbalanced video from Goodricke is plugged into the video lead (possibly via a video DA if we want to send video down to [[Physics Concourse\|the concourse]] as well). The audio cable splits to three balanced jack connectors (with a common screen), one of which has the network audio on it. How these are plugged in will obviously change the function of the circuits from here onwards, however both sides are labelled, and this shouldn't need changing.		Above P/X/002 in the attic there is a wall box with a white plate on it carrying two BNC connectors and four 1/4" jack sockets (someone in York - please take a photo and add it here). These are the ends of the old Rediffusion local contribution cables to [[P/S/016]]. Originally these would have taken individual camera feeds back to the studio and AV rack in P/S/016, but now they act as a pair of audio and video tie lines. The unbalanced video from Goodricke is plugged into the video lead (possibly via a video DA if we want to send video down to [[Physics Concourse\|the concourse]] as well). The audio cable splits to three balanced jack connectors (with a common screen), one of which has the network audio on it. How these are plugged in will obviously change the function of the circuits from here onwards, however both sides are labelled, and this shouldn't need changing.

	The video cable on this section, like most of the other local contribution cables, is a Belden braided foil screened type rather than standard RG59. This gives good shielding and so picture quality, but is very difficult to put a standard crimp connector onto successfully! The braid ends are also sharp, which can make the process painful. The audio cables are unshielded, with two grey and two blue cores in each black outer sheath. The 4 jack connectors wire up all 4 pairs (treating the two blue as a pair and so on) in two cables, without regard to phasing. If anyone ever tries stereo, beware! There is no screen connection to the jacks as the cables are unshielded.		The video cable on this section, like most of the other local contribution cables, is a Belden braided foil screened type rather than standard RG59. This gives good shielding and so picture quality, but is very difficult to put a standard crimp connector onto successfully! The braid ends are also sharp, which can make the process painful. The audio cables are unshielded, with two grey and two blue cores in each black outer sheath. The 4 jack connectors wire up all 4 pairs (treating the two blue as a pair and so on) in two cables, without regard to phasing. If anyone ever tries stereo, beware! There is no screen connection to the jacks as the cables are unshielded.
Line 48:		Line 48:
	\|+ Colour Code in P/X/002 to P/S/016 to Hub cables		\|+ Colour Code in P/X/002 to P/S/016 to Hub cables
	\|}		\|}

	The return feed video cable is the one that comes down from above with the audio in PX003, not the one that comes up through the floor (which is net video). This has changed, so old documentation may list them the other way round. Both go to the control room anyway.

Dummy User: complete description, add colour code labels

2007-07-21T16:24:05Z

complete description, add colour code labels

← Older revision		Revision as of 16:24, 21 July 2007
Line 3:		Line 3:
	=== Structure ===		=== Structure ===
	The cable route consists of a series of extensions added on at each major upheaval in YSTV's history to allow us to keep broadcasting via the existing infrastructure. It is therefore less than planned.		The cable route consists of a series of extensions added on at each major upheaval in YSTV's history to allow us to keep broadcasting via the existing infrastructure. It is therefore less than planned.
	From the [[G/046\|studio]] a 150m unbalanced video cable (originally made for [[Breaker 88]]) and a 3-pair screened audio cable go through the window frame by the monitor rack, along the top of the G/045 windows and up over the room of the college nucleus. From here it wends it's way down along the covered walkway past the (old) Dining Hall and the bar to the "bus stop", then turns left past the cash machine towards the Physics and Electronics building. Just before the doors into this it goes through a hole in the wall of the building to reach the attic room above [[P/X/002]].

	~~=== old stuff~~ to ~~edit ===~~		Behind the monitor rack in the [[G/046\|control room]] is a piece of tag strip screwed to the cable duct, which has three XLR connectors coming off it. These are marked up as Network Audio, Derwent Send and Derwent Return. The last two are basically contribution circuits and re-patched as needed, whilst Network Audio should be fed with the balanced network audio signal. Video is carried on a standard BNC connector plugged in to patch box 6.
	The ~~physics link, using entirely rediffusion cabling~~, ~~was used from~~ the ~~1970s onwards when YSTV moved from the original rediffusion studio / equipment room~~ in ~~PS016 on the physics spine corridor~~.

	~~The link from LTC to PS016 is~~ a ~~standard rediffusion contribution setup, used the opposite direction to that originally intended. The single Physics~~-~~>LTC contribution~~ cable ~~contains two pairs. One is~~ used for ~~broadcast~~ (~~GoodrickeToPhysicsToLTC~~) ~~and~~ the ~~other is used to return things to Physics/YSTV that would~~, ~~originally, only have gotten as far as LTC. The same broadcast~~/~~return operation exists for~~ the ~~6-pair audio contribution cable~~. ~~Two pairs are used for~~ the ~~return~~ (~~mono audio~~ and ~~comms)~~ and ~~one for broadcast (mono audio)~~.		From the tag strip a 3-pair sheilded cable of the type used for the 1998 network and the 150m unbalanced video cable (originally made for [[Breaker 88]]) go through the window frame by the monitor rack, along the top of the G/045 windows and up over the room of the college nucleus. From here it wends it's way down along the covered walkway past the (old) Dining Hall and the bar to the "bus stop", then turns left past the cash machine towards the Physics and Electronics building. Just before the doors into this it goes through a hole in the wall of the building to reach the attic room above [[P/X/002]].

	~~The 9~~-~~pair~~ Rediffusion ~~distribution cable is not touched by YSTV~~ in ~~PS016~~, ~~it does however carry URY~~ audio on the ~~white twisted pair~~ (~~Channel 'E'~~). ~~See URYBroadcastNetwork~~.		Above P/X/002 there is a wall box with a white plate on it carrying two BNC connectors and four 1/4" jack sockets (someone in York - please take a photo and add it here). These are the ends of the old Rediffusion local contribution cables to [[P/S/016]]. Originally these would have taken individual camera feeds back to the studio and AV rack in P/S/016, but now they act as a pair of audio and video tie lines. The unbalanced video from Goodricke is plugged into the video lead (possibly via a video DA if we want to send video down to [[Physics Concourse\|the concourse]] as well). The audio cable splits to three balanced jack connectors (with a common screen), one of which has the network audio on it. How these are plugged in will obviously change the function of the circuits from here onwards, however both sides are labelled, and this shouldn't need changing.
	~~Routing~~

	The ~~run from LTC~~ to ~~PS016 is~~ (~~unbroken~~) ~~Rediffusion cabling~~, ~~inside~~ the ~~covered walkway across~~ the ~~Central Hall bridge~~.		The video cable on this section, like most of the other local contribution cables, is a Belden braided foil screened type rather than standard RG59. This gives good shielding and so picture quality, but is very difficult to put a standard crimp connector onto successfully! The braid ends are also sharp, which can make the process painful. The audio cables are unshielded, with two grey and two blue cores in each black outer sheath. The 4 jack connectors wire up all 4 pairs (treating the two blue as a pair and so on) in two cables, without regard to phasing. If anyone ever tries stereo, beware! There is no screen connection to the jacks as the cables are unshielded.

	~~At PS016~~ the ~~incomming balenced video signal on~~ the ~~twisted pair is received~~, ~~amplified~~ and ~~unbalanced by an original Rediffusion No 6A amplifier, to drive~~ a ~~standard 75ohm coax output. The audio~~ is ~~just jointed~~ (~~chocolate block!~~) ~~without any active electronics~~.		These cables join the mass of other Rediffusion cables running down the wall, through the hole in the floor and into the cable duct in the room below. From here a 6" pipe is laid under the floor of the physics concourse (so I was told), which has a T off to the right near the porter's desk to reach the start of the physics spine corridor. Somewhere here the cables make it up and into the ceiling void above the corridor, where they run until they reach [[P/S/016]].

	~~Between PS016 and PX003,~~ the ~~video is~~ on ~~a 75R coaxial~~ cable~~, and~~ the ~~audio on two twisted pairs,~~ originally ~~part~~ of the contribution ~~links from camera points in PX001~~ to the ~~control room in PS016, now used in reverse. Note that this is Belden foil-braid cable not standard RG59, so fitting connectors is not easy~~.		In P/S/016 the audio cables are joined straight on to the 6-pair Rediffusion audio contribution cable which runs to the [[Broadcast Hub\|Hub]] (originally to LTC). The unbalanced video is fed into a line driver in order to drive one half of the shielded twisted pair Rediffusion video contribution cable to the Hub.

	~~This cable goes~~ up ~~through the cupboard in PS016 with all the incoming cables in it,~~ into the ceiling void, and ~~on down~~ the ~~spine~~ corridor to the concourse~~. Somehow it gets~~ into ~~a 6" cable duct~~ under the ~~concourse floor, which splits~~ to ~~reach~~ the covered ~~way~~ towards Central Hall~~, and emerge into PX003 somehow~~. ~~How~~ the ~~latter gets there~~ is ~~uncertain~~, ~~but may well involve~~ the ~~physics first floor calorifier room~~, ~~accessed via a door from~~ the ~~PX003 attic~~. ~~For more on the layout~~ of ~~these locations see the PhysicsDept page~~.		These contribution cables go back up into the ceiling void, and then back along the corridor to the concourse, and into the pipe under it, now taking the right turn by the porter's lodge to head through the building and out into the covered walkway towards Central Hall. This duct goes across the bridge (exactly how is unknown), then into the underground duct past the front of Central Hall, before coming back up to reach the Hub. This run consists of unbroken Rediffusion cabling.

	~~At PX003,~~ the ~~audio and video got straight through (passive) to the cables laid on top~~ of ~~the covered walkway between Physics and Goodrike~~. ~~Return audio uses two of~~ the ~~three pairs in~~ the ~~grey cable (same cable type as used elsewhere in~~ the ~~1998 broadcast network), and video is on 150m of standard RG59~~.		=== Core Colours ===
			This reflects the wiring in place as of 2006. As all the joints are soldered or terminal blocked, it's unlikely to change, although the patching of the connectors may well do so.

	~~The return feed video cable is the one that comes down from above with the audio~~ in ~~PX003, not the one that comes up through the floor (which is net video). This has changed, so old documentation may list them the other way round. Both go~~ to ~~the control room anyway.~~		{\| border="1"
			!Circuit
			!Colour PX002<->Goodricke
			\|-
			\|Derwent Ret
			\|White / Black pair
			\|-
			\|Derwent Send
			\|Red / Black pair
			\|-
			\|Network Send
			\|Green / Black pair
			\|+ Colour Code in Goodricke to P/X/002 cable
			\|}

	~~In the Goodricke control room both cables come~~ in to ~~the left of the monitor rack near the window. The audio cable goes~~ to ~~a piece of tag strip behing the rack, which splits it into three XLR connectors. The video comes out to trailing BNC, which should be marked, and coiled up on the window-ledge.~~		{\| border="1"
			!Usage (nominal)!!Label in PX003!!Colour PX003<->PS016!!Colour PS016<->Hub
			\|-
			\|Derwent Ret\|\|Derwent Return\|\|Grey in 1st Cable\|\|Yellow pair in 6-pair
			\|-
			\|Derwent Send\|\|Derwent Comms\|\|Blue in 1st Cable\|\|Grey pair in 6-pair
			\|-
			\|Network Send\|\|Net A1\|\|Grey in 2nd Cable\|\|Blue pair in 6-pair
			\|-
			\|Unused\|\|Net A2\|\|Blue in 2nd Cable\|\|no circuit
			\|+ Colour Code in P/X/002 to P/S/016 to Hub cables
			\|}

	~~Until~~ the ~~direct Goodricke to LTC link is repaired (see GoodrickeToLTC) URY use~~ the ~~YSTV comms channel of this return as a bodged method of getting~~ audio ~~from Goodricke to URY. The wire is split~~ in ~~LTC to wherever YSTV want audio~~ (~~usually Derwent~~) ~~and~~ to ~~one channel of~~ the ~~Vanbrugh to LTC audio contribution, used in reverse (see VanbrughToLTC, VanbrughToURY?)~~.		The return feed video cable is the one that comes down from above with the audio in PX003, not the one that comes up through the floor (which is net video). This has changed, so old documentation may list them the other way round. Both go to the control room anyway.

Dummy User: write up the first leg of the journey.

2007-07-21T15:19:57Z

write up the first leg of the journey.

New page

This leg of the [[Current Broadcast Network]] carries the video and audio feeds from the [[G/046|studio]] through to the [[Broadcast Hub|central distribution hub]] where it is distributed out to the various destinations on campus. It is now the oldest part of the network, having been in it's current form since the station moved to [[G/046]] in 1994.

=== Structure ===
The cable route consists of a series of extensions added on at each major upheaval in YSTV's history to allow us to keep broadcasting via the existing infrastructure. It is therefore less than planned.
From the [[G/046|studio]] a 150m unbalanced video cable (originally made for [[Breaker 88]]) and a 3-pair screened audio cable go through the window frame by the monitor rack, along the top of the G/045 windows and up over the room of the college nucleus. From here it wends it's way down along the covered walkway past the (old) Dining Hall and the bar to the "bus stop", then turns left past the cash machine towards the Physics and Electronics building. Just before the doors into this it goes through a hole in the wall of the building to reach the attic room above [[P/X/002]].

=== old stuff to edit ===
The physics link, using entirely rediffusion cabling, was used from the 1970s onwards when YSTV moved from the original rediffusion studio / equipment room in PS016 on the physics spine corridor.

The link from LTC to PS016 is a standard rediffusion contribution setup, used the opposite direction to that originally intended. The single Physics->LTC contribution cable contains two pairs. One is used for broadcast (GoodrickeToPhysicsToLTC) and the other is used to return things to Physics/YSTV that would, originally, only have gotten as far as LTC. The same broadcast/return operation exists for the 6-pair audio contribution cable. Two pairs are used for the return (mono audio and comms) and one for broadcast (mono audio).

The 9-pair Rediffusion distribution cable is not touched by YSTV in PS016, it does however carry URY audio on the white twisted pair (Channel 'E'). See URYBroadcastNetwork.
Routing

The run from LTC to PS016 is (unbroken) Rediffusion cabling, inside the covered walkway across the Central Hall bridge.

At PS016 the incomming balenced video signal on the twisted pair is received, amplified and unbalanced by an original Rediffusion No 6A amplifier, to drive a standard 75ohm coax output. The audio is just jointed (chocolate block!) without any active electronics.

Between PS016 and PX003, the video is on a 75R coaxial cable, and the audio on two twisted pairs, originally part of the contribution links from camera points in PX001 to the control room in PS016, now used in reverse. Note that this is Belden foil-braid cable not standard RG59, so fitting connectors is not easy.

This cable goes up through the cupboard in PS016 with all the incoming cables in it, into the ceiling void, and on down the spine corridor to the concourse. Somehow it gets into a 6" cable duct under the concourse floor, which splits to reach the covered way towards Central Hall, and emerge into PX003 somehow. How the latter gets there is uncertain, but may well involve the physics first floor calorifier room, accessed via a door from the PX003 attic. For more on the layout of these locations see the PhysicsDept page.

At PX003, the audio and video got straight through (passive) to the cables laid on top of the covered walkway between Physics and Goodrike. Return audio uses two of the three pairs in the grey cable (same cable type as used elsewhere in the 1998 broadcast network), and video is on 150m of standard RG59.

The return feed video cable is the one that comes down from above with the audio in PX003, not the one that comes up through the floor (which is net video). This has changed, so old documentation may list them the other way round. Both go to the control room anyway.

In the Goodricke control room both cables come in to the left of the monitor rack near the window. The audio cable goes to a piece of tag strip behing the rack, which splits it into three XLR connectors. The video comes out to trailing BNC, which should be marked, and coiled up on the window-ledge.

Until the direct Goodricke to LTC link is repaired (see GoodrickeToLTC) URY use the YSTV comms channel of this return as a bodged method of getting audio from Goodricke to URY. The wire is split in LTC to wherever YSTV want audio (usually Derwent) and to one channel of the Vanbrugh to LTC audio contribution, used in reverse (see VanbrughToLTC, VanbrughToURY?).